Licensed & Insured, in Philadelphia and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Philadelphia
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (267) 715-9723 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Philadelphia and surrounding areas · On-site visits included · Free estimate within 24h
Philadelphia Metal Roofing is a team of local certified professionals based in Philadelphia. We respond quickly in Philadelphia and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (267) 715-9723⭐⭐⭐⭐⭐ 4.9/5 · 288 verified Google reviews
“We needed a new metal roof on our equipment barn out in Chester and these guys knocked it out in two days. The crew of four was super professional and the corrugated panels look great. Cleaned up every last screw and scrap piece before they left.”
Commercial & Agricultural Metal Roofing
“Had a copper roof put on our brick colonial in Lansdowne and it looks absolutely stunning. The crew took their time with the flashing around the chimney and the seams are perfect. Neighbors keep stopping to ask who did the work.”
Copper & Specialty Metal Roofing
“Our old stone barn had a rusted red roof that was leaking in three spots. Philadelphia Metal Roofing tore it off and installed new ribbed panels with proper flashing. Took about a week and a half, and they hauled away every bit of the old metal.”
Metal Roof Replacement
“Got a standing seam roof installed on our stone house in Media and I'm honestly relieved it's finally done right. The previous contractor left us with leaks for years. These folks did a full inspection first, replaced the flashing, and the 40-foot panels went up without a hitch.”
Standing Seam Metal Roofing
“Had them come out for a leak around the roof vent on our metal roof in Norristown. They found the issue fast, resealed the flashing, and replaced a few loose screws while they were up there. Only gripe is it took a few days to get on the schedule, but the repair itself was solid.”
Metal Roof Repair
“We had new gutters installed to handle runoff from our metal roof on the brick house in Conshohocken. They matched the color to the roof perfectly and the downspouts are angled so water finally drains away from the foundation. Big improvement.”
Gutters for Metal Roofs
“Went with the retrofit over our existing shingles on the stone house in Doylestown and couldn't be happier. Saved us a ton of money versus a full tear-off, and the stone-coated steel looks like a real slate roof from the street. Crew was in and out in three days.”
Metal Roof Over Shingles (Retrofit)
“Booked an inspection after the windstorms and they were thorough, checked every seam, screw, and flashing point on our stone house in Philadelphia. Found a couple of loose fasteners and some ice dam concerns near the eaves, gave me a written report with photos. Honest assessment, no pressure to upsell. Small note: I wish the report had come a day sooner, but the work was quality.”
Metal Roof InspectionReal photos of our work in Philadelphia · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel installation | Starting at $8/sq ft | Includes tear-off, underlayment, and panels; roof complexity and tear-off layers move the price. |
| Standing seam installation | Starting at $12/sq ft | Concealed fasteners and custom panel lengths; valleys, dormers, and mansards raise the figure. |
| Stone-coated steel installation | Starting at $11/sq ft | Slate or shake profile panels with full underlayment; steep pitch and cut-up roofs add labor. |
| Complex or historic home | On estimate | Mansards, turrets, copper trim, and historic district review need an on-site look before pricing. |
| Estimate | Free | On-site inspection and written scope within 24 hours at (267) 715-9723, no obligation. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snap-lock standing seam, simple roof | Starting at $10/sq ft | Includes panels, clips, underlayment and basic flashing on straightforward residential pitches. |
| Mechanically seamed panels | Starting at $14/sq ft | Adds field seaming labor and heavier clips for low-slope and high-wind exposures. |
| Complex roof with valleys and dormers | On estimate | Mansards, bay windows and multiple chimneys need an on-site look before pricing. |
| Deck repair and sheathing replacement | On estimate | Rotten sheathing found at tear-off is priced per sheet after inspection. |
| Travel | Included | in Philadelphia and surrounding counties, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (267) 715-9723, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam replacement | Starting at $9/sq ft | Full tear-off, deck repair, underlayment, flashing, and hidden-fastener panels installed. |
| Exposed-fastener panel replacement | Starting at $8/sq ft | Tear-off and new corrugated or ribbed panels, best for barns, sheds, and garages. |
| Stone-coated steel or metal shingle replacement | Starting at $11/sq ft | Slate or shake profile with full tear-off, flashing, and historic district compliant colors. |
| Complex or large-scale replacement | On estimate | Steep mansards, multiple chimneys, and tight rowhouse access need an on-site look first. |
| Travel | Included | In Philadelphia and surrounding counties, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (267) 715-9723, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener retrofit over shingles | Starting at $7/sq ft | Includes sub-purlin, underlayment, panels, and trim; layer count and pitch move the rate. |
| Standing seam retrofit over shingles | Starting at $11/sq ft | Concealed fasteners and raised seams; steep pitches and dormers push the price up. |
| Stone-coated steel or metal shingle retrofit | Starting at $10/sq ft | Slate or shake profile panels; historic district or HOA approval may add design review time. |
| Complex or large-scale retrofit | On estimate | Mansard fronts, multiple valleys, or three shingle layers need an on-site look before pricing. |
| Travel | Included | In Philadelphia and surrounding counties, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (267) 715-9723, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (sealant, fasteners, small flashing) | Starting at $450 | Covers resealing penetrations, replacing loose screws, and small flashing fixes; access and roof pitch move the price. |
| Panel replacement (single panel or section) | Starting at $850 | Includes matching panel profile and color, removing the damaged section, and resetting laps; panel type drives cost. |
| Chimney or skylight flashing rebuild | Starting at $1,200 | Rebuilds flashing and underlayment at the penetration; masonry condition and height affect the scope. |
| Storm and wind damage repair | On estimate | Needs an on-site look to assess panel, flashing, and hidden deck damage before a number is given. |
| Travel | Included | In Philadelphia and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (267) 715-9723, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single-source leak repair | Starting at $450 | Includes inspection, source tracing, and repair of one failed fastener, boot, or small flashing detail. |
| Multi-source or flashing repair | Starting at $750 | Covers several leak points or a chimney, skylight, or party-wall flashing rebuild with compatible metals. |
| Seam or panel section repair | Starting at $950 | Resets or replaces separated seams and panel sections, priced by linear feet and roof access difficulty. |
| Emergency tarping after storm | Starting at $350 | Same-day temporary protection to stop active water intrusion until permanent repairs can be scheduled. |
| Complex or large-scale job | On estimate | Widespread fastener failure, multiple roof planes, or historic details need an on-site inspection before pricing. |
| Estimate | Free | Written scope with photos, response within 24 hours at (267) 715-9723, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot screw replacement | Starting at $750 | Covers a small porch or shed roof with loose screws and failed washers replaced. |
| Full roof re-fastening | Starting at $1,850 | Every screw replaced with oversized fasteners and new EPDM washers on a typical home roof. |
| Re-fastening with panel reseal | Starting at $2,400 | Adds lap and closure strip resealing at valleys and ridges where water was tracking. |
| Large or steep-access roof | On estimate | Three-story rowhouses, mansard fronts, and steep pitches need an on-site look before quoting. |
| Travel | Included | In Philadelphia and surrounding areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (267) 715-9723, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Small shed or porch roof | Starting at $5.50/sq ft | Includes standard corrugated or R-panel, trim, closures and screws on a small, simple roof. |
| Garage or workshop roof | Starting at $6.75/sq ft | Includes tear-off of old panels, new underlayment where needed, trim and full screw pattern. |
| Barn or large outbuilding | On estimate | Steep pitch, valleys, cupolas and staging drive the number, so we look on site first. |
| Re-screw and re-seal existing panels | Starting at $2.25/sq ft | Includes replacing backed-out screws, new washered fasteners and sealing failed penetrations. |
| Travel | Included | in Philadelphia and surrounding counties, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (267) 715-9723, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof, standard pitch | Starting at $9/sq ft | Includes tear-off, underlayment, shingles and basic flashing on a straightforward gable roof. |
| Steep or complex roof | Starting at $12/sq ft | Adds cost for dormers, valleys, mansard fronts and multi-plane roofs common on older twins. |
| Retrofit over existing shingles | Starting at $8/sq ft | Skips tear-off when one sound layer remains and code allows the recover. |
| Stone-coated steel shingles | Starting at $11/sq ft | Premium stone-granule finish in slate or shake profile with heavier trim package. |
| Large or complex job | On estimate | Steep historic homes and multi-building properties need an on-site walk before pricing. |
| Estimate | Free | On-site assessment and written scope, response within 24 hours at (267) 715-9723. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Simple gable roof, retrofit | Starting at $9/sq ft | Includes panels, underlayment, and standard flashing on a straightforward gable; pitch and existing layers move the rate. |
| Complex roof with valleys and dormers | Starting at $12/sq ft | Covers multiple planes, valley metal, and dormer flashing; number of penetrations and roof height drive the price up. |
| Full tear-off and re-deck | On estimate | Needs an on-site look because deck condition, layer count, and disposal access vary block by block in Philadelphia. |
| Historic profile or custom color | On estimate | Special-order panels and design review add lead time and cost; we confirm the profile before quoting. |
| Travel | Included | In Philadelphia and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (267) 715-9723, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent and trim work | Starting at $20/sq ft | Includes basic copper flashing, bay window roofs, and trim; price rises with gauge, custom bends, and access difficulty. |
| Zinc flat seam roofing | Starting at $28/sq ft | Includes soldered flat seams for low-slope porch covers; price moves with panel width and substrate repairs. |
| Custom copper fabrication | Starting at $35/sq ft | Includes shop-built cupolas, finials, and curved panels; price depends on profile complexity and soldering time. |
| Full specialty metal roof replacement | On estimate | Requires on-site measurement of roof area, tear-off, decking condition, and historic review requirements before pricing. |
| Travel | Included | In Philadelphia and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (267) 715-9723, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Elastomeric acrylic coating | Starting at $2.50/sq ft | Includes wash, light rust prep, and one finish coat on sound panels |
| Rust-converter plus primer system | Starting at $3.25/sq ft | Adds rust conversion and spot priming, the main driver on older corrugated roofs |
| Full restoration system | Starting at $4.50/sq ft | Wash, rust treat, seam seal, primer, and two finish coats for widespread surface rust |
| Complex or large-scale job | On estimate | Steep pitch, heavy rust, or multiple valleys and penetrations need an on-site look |
| Travel | Included | in Philadelphia and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (267) 715-9723, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single chimney flashing repair | Starting at $600 | Includes new step and counterflashing at one brick chimney, standard access and pitch. |
| Skylight reflash or curb repair | Starting at $750 | Covers new head, sill, and side flashing on one skylight, standard roof pitch. |
| Valley or dormer flashing repair | Starting at $650 | Replaces failed valley metal or dormer step flashing, includes debris clearing. |
| Complex or multi-point repair | On estimate | Needs an on-site look when several penetrations, steep slate, or masonry work are involved. |
| Travel | Included | in Philadelphia and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (267) 715-9723, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Pad-style guards, single roof section | Starting at $1,200 | Includes layout, guards, fasteners, and sealing for one entry or porch roof. |
| Bar and rail system | Starting at $1,800 | Includes rails, brackets, and fastening for steep or long roof runs. |
| Full rowhouse or twin roof | On estimate | Multiple release zones, ice-dam detailing, and access drive the final scope. |
| Ice-dam detailing at eaves | Starting at $650 | Edge metal and underlayment work at valleys, chimneys, and low-slope eaves. |
| Travel | Included | In Philadelphia and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (267) 715-9723, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof, flashing, gutter, and penetration inspection with dated photos and a written assessment. |
| Minor repair (seams, fasteners, flashing) | Starting at $350 | Includes re-sealing lifted seams, replacing backed-out screws, and rebuilding small flashing gaps. |
| Panel replacement | Starting at $850 | Includes matching panel, trim, and fasteners; price moves with panel profile and roof access. |
| Complex or large-scale damage | On estimate | Limb impact, decking damage, or widespread uplift needs an on-site look before pricing. |
| Travel | Included | In Philadelphia and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (267) 715-9723, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Walk-over inspection | Free estimate | Full roof walk with fastener, seam, flashing and coating checks, plus photo documentation |
| Exposed-fastener audit | Starting at $250 | Screw-by-screw check on corrugated and R-panel roofs, priced by roof size and access |
| Pre-purchase or insurance inspection | Starting at $350 | Written report with photos, defect list and remaining service-life estimate for third parties |
| Complex or large-scale roof | On estimate | Multi-level rowhouses, mansard fronts and steep pitches need an on-site look before a number |
| Travel | Included | in Philadelphia and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (267) 715-9723, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless K-style gutter on metal roof | Starting at $9/linear ft | Includes on-site forming, hidden hangers, and standard downspout; tree load and access move the price. |
| Half-round or copper gutter | Starting at $18/linear ft | Includes copper or half-round profile and strap hangers; historic trim and custom bends raise the figure. |
| Leaf guard installation | Starting at $6/linear ft | Includes mesh or screen sized to the gutter; heavy debris from mature oaks and planes adds cost. |
| Downspout addition or rerouting | Starting at $180 per run | Includes new downspout and fittings; distance from foundation and brick wall access affect the total. |
| Complex or large-scale job | On estimate | Multi-story eaves, historic districts, and full-property runs need an on-site look before pricing. |
| Travel | Included | In Philadelphia and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (267) 715-9723, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and leak diagnosis | Free estimate | Walkover, photo documentation and written scope; access and roof height are the main factors. |
| Screw replacement and re-fastening | Starting at $450 | Failed fasteners and washers replaced; panel count and roof pitch move the price. |
| Exposed-fastener panel installation | Starting at $9 per sq ft | Corrugated or R-panel with flashing; deck condition and access add to the base rate. |
| Standing seam installation | Starting at $14 per sq ft | Concealed fasteners and raised seams; pitch, panel length and flashing drive the cost. |
| Retrofit over existing shingles | On estimate | Needs a deck check and layer count before pricing; code limits existing layers. |
| Travel | Included | In Philadelphia and surrounding counties, no separate call-out or mileage fee. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Philadelphia want a crew that understands brick rowhouses, mansard fronts, and the low-slope porch roofs that define so much of this city. Philadelphia Metal Roofing is a local contractor network built for exactly that housing stock, handling metal roof installation, replacement, re-roofs, and repairs on homes from South Philadelphia and Fishtown to Germantown and Chestnut Hill. We also serve Chester, Norristown, Media, and Lansdowne, where Victorian twins, stone Colonials, and 1950s Cape Cods each call for a different metal system.
This is not a coastal or mountain climate, and we do not sell it as one. The dominant local failure mode is water intrusion at fasteners, seams, and flashing after severe summer thunderstorms, nor'easters, and freeze-thaw cycles, made worse by leaf drop from London planes, maples, and oaks into valleys and gutters. We know the aging screw-down roof stock across the Northeast, Roxborough, and Delaware County, and we say plainly when a repair beats a replacement. Reach out for a free estimate and straight guidance.
Metal roofs leak for a handful of predictable reasons, and most are fixable. On 15 to 30 year old exposed-fastener roofs, the number one cause is fasteners backing out as the EPDM sealing washers dry, shrink, and crack, letting water past the screw head. Thermal movement works panels against each other until seams separate. Pipe boots and flashing fail at chimneys, skylights, and valleys, where water concentrates and the original sealant has aged out. Wind can lift panels after a storm, and fallen limbs puncture even heavy-gauge steel.
Ignoring a small entry point is what turns a repair into a project. Water tracks along purlins and decking far from where it enters, so the stain on your ceiling is rarely above the actual gap. That path rots sheathing, damages insulation, and can reach interior finishes before you notice. The honest call between repair and replacement depends on panel condition, fastener age, and deck integrity, not on a sales target. Often a full screw replacement and re-fastening restores a watertight roof for a fraction of replacement cost, and we will tell you when that is the right answer.
For active leaks, wind damage, or a roof you suspect is failing, call (267) 715-9723. Our metal roof leak repair crews trace the source, fix the flashing or fastener, and document what we find so you understand the repair. No pressure, no storm-chaser tactics, just a clear assessment of what your roof needs.
The system should match the home, not the other way around. Standing Seam Metal Roofing uses concealed clips and a Kynar 500 or PVDF finish for a premium, low-maintenance roof with no exposed screws, ideal for dormers, additions, and farmhouses. Corrugated & Ribbed Panel Roofing is the economical workhorse for barns, sheds, and workshops. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing in slate or shake profiles, and Copper & Specialty Metal Roofing for bay windows, cupolas, and historic trim.
The honest comparison is simple: standing seam costs more up front and has no exposed fasteners to maintain, while screw-down costs less and needs its fasteners serviced over its life. When the deck is sound, Metal Roof Over Shingles (Retrofit) is a legitimate option; when it is not, tear-off is the right call. We will walk you through which fits your roof and why.
Metal roof projects in Philadelphia are typically quoted per square foot for installations, while repairs are often flat-rate. Price depends on the panel system and metal gauge, roof pitch and complexity, whether we tear off or recover, decking condition, and access. Because those factors vary so much from a Fishtown rowhouse to a Main Line estate, we frame figures as typical ranges only, and final pricing depends on the roof and site conditions. You can review general guidance on our pricing page.
Some carriers may offer premium discounts for metal or impact-rated roofs, though that is between you and your insurer. To get an accurate number for your home, request a free estimate or free roof inspection and we will document what we find before any work begins.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise a claim will be approved. We document conditions honestly and let the process work.
On permits: in most jurisdictions, a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements differ. Historic district or HOA design review can also restrict panel profile and color choices. Requirements vary, always verify with the Philadelphia building or planning department before starting your project. For help understanding what your project may involve, contact us.
Ready to get started? Philadelphia Metal Roofing serves in Philadelphia and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Philadelphia · Response within 24h · No commitment · ☎ (267) 715-9723
Your Free Quote Request