Serving the Philadelphia area  ·  (267) 715-9723  ·  Open Mon-Sun 7am-7pm
📞 (267) 715-9723 Free Quote

Metal Roofing in Norristown, PA (19401) · Local Professionals

Philadelphia Metal Roofing · Fast response in Norristown and the Philadelphia area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+288Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Norristown's hillside blocks above the Schuylkill are packed with 1890s stone and brick homes whose steep slate and shingle roofs are now past their prime. The river bends, the old industrial parcels, and the tight streets off DeKalb Pike create runoff and access puzzles you don't see in newer suburbs.

That's why homeowners in 19401 call Philadelphia Metal Roofing. We know the steep pitches, the stone gable walls, and the chimney flashing details that fail first on these blocks near Elmwood Park and the county courthouse. We install, repair, and replace metal roofing built for this weather and these houses.

Metal Roofing in Norristown (19401)

Norristown sits on rolling ground above the Schuylkill, with narrow lots and steep roof pitches that make access and staging a real part of the job. Many homes here are 100+ years old with stone or brick walls, original slate, and layered shingles that hide rot at the eaves and valleys. The freeze-thaw cycles along the river valley stress flashing and chimney crickets, and summer storms drop limbs that puncture older roofs. We plan for ladder placement on tight side yards, protect landscaping, and use debris chutes where a dumpster can't sit close.

Our team has worked across Montgomery County and Philadelphia for years, and we bring that experience to every Norristown job, from small porch roofs to full replacements on steep Victorian twins.

Our services in Norristown

How a Job Works in Norristown

Step 1: Call (267) 715-9723 or request a free on-site assessment. We inspect the roof, attic, and flashing, then give you a written scope and price before any work starts.

Step 2: We schedule around Norristown permit timing and, when needed, coordinate with historic review or HOA rules. On tight streets, we stage materials carefully and keep walkways clear for neighbors.

Step 3: We clean the site daily, haul away old roofing, and do a final walkthrough with you to confirm the work and magnetic sweep for nails. We leave your property clean.

Pricing in Norristown depends on roof size, pitch, access, and condition. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, replacement at $9, and retrofits over shingles at $7. Repairs start at $450, leak repairs at $450, and screw replacement at $750. Flashing and chimney work starts at $600, and gutters for metal roofs start at $9 per linear foot. We give free estimates and explain what drives the cost, so you can plan. Call (267) 715-9723 to schedule.

My 1920s stone house near Elmwood Park has original slate and ice dams every winter. Can a metal roof help?
Yes. We often install standing seam or stone-coated steel over a proper underlayment and ice-and-water shield at the eaves. On steep stone homes, we pay close attention to valley flashing and chimney details, which are where ice dams usually start.
A storm just peeled back panels on my porch roof off DeKalb Pike. How fast can you respond?
We prioritize active leaks and wind damage. Call (267) 715-9723, and we will schedule an inspection, tarp if needed, and give you a repair or replacement plan. Response times depend on storm volume, but we keep you informed.
What does a typical metal roof replacement cost for a rowhouse in 19401?
Most rowhouse replacements fall in the $9 to $14 per square foot range installed, depending on pitch, layers to remove, and flashing complexity. Small porch roofs cost less. We provide a free estimate with a clear breakdown.
Do I need a permit for a metal roof in Norristown?
Full replacements and re-roofs typically require a permit from Norristown's code office, and rules vary by scope. We help you understand what is needed and schedule inspections. Always confirm current requirements with the municipality before work begins.
My neighbor's tree drops limbs on my roof, and we share a property line. What should I do about HOA or boundary issues?
Document the damage with photos and check your HOA rules on roofing color and profile before ordering materials. For boundary concerns, a survey or written neighbor agreement is best. We can coordinate installation timing to respect property lines.
Are you fully insured for work at my Norristown home?
Yes. We carry general liability and workers' compensation insurance.
What maintenance does a metal roof need in Norristown's climate?
Check fasteners and seals annually, keep gutters clear of leaves from the mature street trees, and inspect flashing after severe storms. We offer inspections and tune-ups to catch loose screws and worn sealant before they become leaks.
Why choose us?

Trusted professionals in Philadelphia

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Philadelphia

All your work handled by qualified professionals in Philadelphia

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

288+ Verified Client Reviews in Philadelphia

⭐⭐⭐⭐⭐ 4.9/5 · 288 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Philadelphia · Response within 24h · No commitment · ☎ (267) 715-9723

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Philadelphia ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm