Serving the Philadelphia area  ·  (267) 715-9723  ·  Open Mon-Sun 7am-7pm
📞 (267) 715-9723 Free Quote

Metal Roofing in Media, PA (19063) · Local Professionals

Philadelphia Metal Roofing · Fast response in Media and the Philadelphia area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+288Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Media, the seat of Delaware County, is a town where Victorian twins and stone Colonials sit under a canopy of maples, and the humidity off the Delaware Valley works its way into every flashing and seam. If you live near the Media Theatre or along State Street, you know the look: slate and shingle roofs that have seen a century of freeze-thaw cycles and summer storms.

Homeowners in 19063 call Philadelphia Metal Roofing because we understand the specific wear that Media's older housing stock endures. From the stone homes near Glen Providence Park to the twins off Baltimore Pike, we have seen how moss streaks and ice dams attack these roofs.

Metal Roofing in Media (19063)

Media's terrain and lot shapes present unique challenges. The borough sits on rolling hills, and many properties have tight side yards and steep driveways, which means staging materials and equipment requires careful planning. Older homes often have multiple roof planes, dormers, and chimneys that need custom flashing. The mature maples and oaks that give Media its character also drop leaves and debris that clog gutters and valleys, leading to water backup and rot. We regularly install standing seam and stone-coated steel roofs that handle these conditions, and we know how to work around the historic district review process when your home is in a designated area.

Our team has served Media and the surrounding Delaware County communities for years. We understand the local building codes, the permit thresholds, and the inspection requirements that vary by jurisdiction. Whether you are replacing a roof on a Victorian twin or repairing a leak on a stone Colonial, we bring the right materials and experience to get the job done correctly.

Our services in Media

How a Job Works in Media

Step 1: You call us at (267) 715-9723 or request a free on-site assessment. We will inspect your roof, discuss your options, and provide a written estimate. We will also check for any historic district or HOA requirements that might affect your project.

Step 2: Once you approve the estimate, we schedule the work and handle the permitting. In Media, tight lot access and steep grades can affect scheduling, so we plan ahead for material delivery and equipment placement. If your home is in a historic district, we coordinate with the local review board to ensure the panel profile and color meet the guidelines.

Step 3: After the installation or repair, we clean up thoroughly and walk through the finished work with you. We make sure you understand the warranty and maintenance requirements, and we leave your property as clean as we found it.

Pricing for metal roofing in Media depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. For smaller jobs, metal roof repair starts at $450, and screw replacement and re-fastening starts at $750. We also offer metal roof over shingles (retrofit) starting at $7 per square foot, which can be a cost-effective option if your current roof allows it. Call us at (267) 715-9723 for a free estimate tailored to your Media home.

My Victorian twin near the Media Theatre has a steep roof and original slate. Can you install metal over it or do I need a full tear-off?
We can often install a metal roof over existing slate if the structure is sound and local code allows it, but we will assess the condition of the deck and underlayment first. For historic homes in Media, we also check if the borough's historic district guidelines require a full tear-off or specific panel profiles. We will give you a clear recommendation during the free inspection.
A storm just lifted some panels on my roof off Baltimore Pike. How fast can you respond?
We prioritize storm damage emergencies in Media and the surrounding areas. Call us at (267) 715-9723, and we will schedule an inspection as soon as possible, often within 24 to 48 hours. We can secure the roof temporarily and provide a detailed estimate for permanent repairs.
What is the typical cost for a metal roof repair on a stone Colonial in Media?
Most metal roof repairs in Media start at $450, but the final cost depends on the extent of the damage, accessibility, and whether flashing or seams need replacement. We provide a free estimate after inspecting your roof, so you know the exact price before we begin.
Do I need a permit to replace my roof in Media, and does the historic district affect the process?
Yes, roofing permits are commonly required for full replacements in Media, and the thresholds and fees vary. If your home is in the historic district, design review may restrict panel profile and color. We handle the permitting process and coordinate with the local building department to ensure compliance.
My neighbor's tree hangs over my property line, and I want to install a metal roof. What are the rules?
Property line issues are civil matters, but we can help you plan the installation to avoid conflicts. If your HOA has design guidelines, we will coordinate with them for approval. We always recommend discussing your project with neighbors beforehand to avoid misunderstandings.
Are you fully insured for roofing work in Media?
Yes, Philadelphia Metal Roofing is fully insured with general liability and workers' compensation coverage.
How often should I inspect my metal roof in Media, and what maintenance does it need?
We recommend an annual inspection, especially after winter and before fall. Media's mature trees drop leaves and debris that can clog gutters and valleys, leading to water damage. We check fasteners, seams, and flashing, and clean debris to prevent issues. Call us to schedule a maintenance visit.
Why choose us?

Trusted professionals in Philadelphia

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Philadelphia

All your work handled by qualified professionals in Philadelphia

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

288+ Verified Client Reviews in Philadelphia

⭐⭐⭐⭐⭐ 4.9/5 · 288 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Philadelphia · Response within 24h · No commitment · ☎ (267) 715-9723

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Philadelphia ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm