Serving the Philadelphia area  ·  (267) 715-9723  ·  Open Mon-Sun 7am-7pm
📞 (267) 715-9723 Free Quote

Metal Roofing in Jenkintown, PA (19046) · Local Professionals

Philadelphia Metal Roofing · Fast response in Jenkintown and the Philadelphia area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+288Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Jenkintown is a small borough where the streets are lined with mature oaks and maples, and the housing stock is a mix of Victorian twins, stone Colonials, and brick rowhouses, many dating back to the early 1900s. The compact lots and heavy leaf fall mean gutters and roofs take a beating, especially around the Jenkintown-Wyncote train station and along Greenwood Avenue.

Homeowners in 19046 call Philadelphia Metal Roofing because we understand the specific challenges of roofing here: tight access on narrow streets, the need to protect historic details, and the constant battle against moisture from leaves and snow.

Metal Roofing in Jenkintown (19046)

Jenkintown's terrain is gently rolling, with many homes sitting on slight grades that can channel water toward foundations if drainage is not handled correctly. The mature tree canopy, while beautiful, drops leaves that clog gutters and valleys, leading to ice dams in winter and moss growth on shaded roof sections. Many homes here have original slate or asphalt shingles that are nearing the end of their life, and homeowners are increasingly turning to metal roofing for its durability and low maintenance. We often see standing seam on porch roofs and dormers, and stone-coated steel that mimics slate on larger twins. Our team is experienced with the tight lot lines and historic character of Jenkintown, and we know how to work around the delicate details of older homes without compromising their appearance.

We have been serving Jenkintown and the surrounding Philadelphia area for years, and we understand the local building codes and the importance of proper ventilation and flashing in this climate. Whether you need a full replacement or a repair, we bring the same level of craftsmanship to every job.

Our services in Jenkintown

How a Job Works in Jenkintown

Step 1: It starts with a phone call to (267) 715-9723 or a request through our website. We schedule a free on-site assessment at your convenience, where we inspect your roof, discuss your options, and provide a detailed written estimate. We will point out any issues we see, like worn flashing or loose fasteners, and explain what needs immediate attention versus what can wait.

Step 2: Once you approve the estimate, we pull the necessary permits from the local building department (we handle the paperwork) and schedule the work. On installation day, our crew arrives early and protects your landscaping with tarps. We know that Jenkintown streets can be narrow, so we plan material deliveries carefully to avoid blocking neighbors. For homes in historic districts, we coordinate with the borough to ensure compliance with design guidelines.

Step 3: After the work is complete, we do a thorough cleanup, including magnet sweeping for nails, and walk you through the finished job. We do not consider the job done until you are satisfied. We leave your property clean and tidy, just as we found it (or better).

Pricing for metal roofing in Jenkintown depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and replacement at $9. For smaller jobs like repairs, we start at $450 for leak fixes, and screw replacement starts at $750. Gutter installation for metal roofs starts at $9 per linear foot. These are starting prices, and we provide a free estimate to give you an accurate number. Factors like access, roof pitch, and the number of layers to remove can affect the final cost. Call us at (267) 715-9723 to schedule your free estimate.

My home near the Jenkintown-Wyncote station has a slate roof that is failing. Can you match the look with metal?
Yes. Many homes in Jenkintown have original slate roofs that are expensive to repair. We often recommend stone-coated steel or metal shingles that mimic the look of slate, providing the same aesthetic without the weight and maintenance. We can bring samples to your free estimate so you can see the profiles and colors.
A storm just knocked down a tree limb on my roof in Jenkintown. How quickly can you respond?
We offer free inspections for storm damage and can often provide same-day or next-day emergency service for active leaks or structural damage. Call us at (267) 715-9723, and we will assess the damage and tarp the area if needed to prevent further water intrusion.
What is the typical cost for a metal roof repair in Jenkintown?
Most repairs, like fixing a leak or replacing damaged flashing, start at $450. The exact cost depends on the extent of the damage and the accessibility of the area. We provide a written estimate before any work begins, so you know what to expect.
Do I need a permit for a metal roof replacement in Jenkintown?
Yes, a building permit is generally required for roof replacements in Jenkintown. The requirements can vary, so we recommend checking with the Jenkintown Building Department. We handle the permit application process for you to ensure compliance.
My neighbor's tree hangs over my roof. What are my rights regarding trimming branches in Jenkintown?
In Pennsylvania, you generally have the right to trim branches that overhang your property line, but you should not damage the tree. We recommend discussing it with your neighbor first. If branches are causing roof damage, we can provide an inspection report to support your case. For HOA communities, check your bylaws for specific rules.
Are you insured for roofing work in Jenkintown?
Yes, we are fully insured with general liability and workers' compensation coverage. This protects you and your property in the unlikely event of an accident.
How can I prevent ice dams on my metal roof in Jenkintown?
Ice dams form when heat escapes through the roof and melts snow, which refreezes at the eaves. Proper attic insulation and ventilation are key. We also install snow guards and ice protection systems to prevent large sheets of snow from sliding off and to minimize ice dam formation. Regular gutter cleaning, especially after the heavy leaf fall in Jenkintown, also helps.
Why choose us?

Trusted professionals in Philadelphia

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Philadelphia

All your work handled by qualified professionals in Philadelphia

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

288+ Verified Client Reviews in Philadelphia

⭐⭐⭐⭐⭐ 4.9/5 · 288 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Philadelphia · Response within 24h · No commitment · ☎ (267) 715-9723

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Philadelphia ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm