Serving the Philadelphia area  ·  (267) 715-9723  ·  Open Mon-Sun 7am-7pm
📞 (267) 715-9723 Free Quote

Metal Roofing in Lansdale, PA (19446) · Local Professionals

Philadelphia Metal Roofing · Fast response in Lansdale and the Philadelphia area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+288Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Lansdale is a borough where 1920s brick twins and older downtown homes sit on tight lots off Main Street and Broad Street, just a few blocks from the Lansdale SEPTA station and the shops along West Main. The housing stock here is older, and the winters bring wet, heavy snow that sits on low-slope porch roofs and piles up at the eaves.

Homeowners in Lansdale (19446) call Philadelphia Metal Roofing because we know how ice dams form on those older roofs and why standing seam and snow guards are such frequent work in this borough. We are based in Philadelphia and serve Lansdale and the surrounding Montgomery County area, and we are fully insured with general liability and workers' compensation.

Metal Roofing in Lansdale (19446)

Lansdale is not a flat grid of new construction. The borough has a mix of 1920s brick twins, older downtown homes on narrow lots, and post-war subdivisions with Cape Cods and ranches. Many of these roofs were framed for slate or asphalt shingles, and the eaves are low, which means snow and ice have a place to sit and back up. The freeze-thaw cycles in Montgomery County are hard on flashing, valleys, and chimney collars, and we see a lot of ice damming at the eaves on homes near Whites Road Park and the older streets off Valley Forge Road. Access can be tight on the alleys behind Main Street, and we plan for that before we start.

Our team has worked on standing seam porch roofs, copper bay windows, corrugated panels on sheds and garages, and stone-coated steel in slate and shake profiles on suburban homes across Lansdale and the surrounding townships. We know how to match the profile and color to the older housing stock, and we know when a retrofit over existing shingles makes sense and when it does not.

Our services in Lansdale

How a Job Works in Lansdale

Step 1: You call (267) 715-9723 or request a free estimate online. We schedule an on-site assessment, look at the roof, the flashing, the gutters, and the attic if needed, and we give you a written scope with pricing before any work begins.

Step 2: We handle the work itself. For Lansdale jobs, that often means coordinating with the borough on permit timing and planning for tight alley access or limited parking on the older streets. If your home is in a historic district or an HOA, we review the profile and color requirements before ordering materials. We protect landscaping and walkways, and we keep the site secure at the end of each day.

Step 3: We clean up, haul away old materials, and walk the property with you. We check gutters, downspouts, and the ground for nails or debris, and we do not consider the job done until you have seen the finished work and signed off.

Pricing in Lansdale depends on the size and pitch of the roof, the condition of the decking and flashing, access, and how soon you need the work done. As a ballpark, metal roof installation starts at $8 per square foot, standing seam starts at $10 per square foot, and metal roof replacement starts at $9 per square foot. A retrofit over existing shingles starts at $7 per square foot, and metal roof repair or leak repair starts at $450. Screw replacement and re-fastening starts at $750, and flashing, chimney, or skylight repair starts at $600. Snow guards and ice protection start at $1,200, and gutters for metal roofs start at $9 per linear foot. For a free estimate on your Lansdale property, call (267) 715-9723.

My 1920s twin near Main Street has ice backing up at the eaves every winter. Will a standing seam roof and snow guards actually fix that?
It can help a lot, but the fix is a system. We look at attic insulation and ventilation, the eave detail, and the gutter sizing before we recommend panels. On older Lansdale twins, we often install standing seam with a proper underlayment and snow guards above the gutter line so snow releases in a controlled way instead of shearing off. We will tell you honestly if the ice problem is mostly a ventilation issue.
A storm just lifted panels on my roof in Lansdale. How fast can you get out?
We prioritize active leaks and storm damage in Lansdale and the surrounding area. Call (267) 715-9723 and we will schedule an inspection, often the same day or next day for emergencies. We can secure the roof, document the damage for your insurance claim, and give you a repair or replacement estimate. We never promise coverage or suggest a deductible can be waived.
What does a typical metal roof replacement cost for a Lansdale Cape Cod or twin?
Most Lansdale homes fall in a range, not a single number. A straightforward replacement on a Cape Cod might start around $9 per square foot for the metal, but the total depends on roof size, how many layers need to come off, decking repairs, and flashing details around chimneys and dormers. We give you a written estimate after we see the roof, and the price does not change unless we find hidden damage you approve.
Do I need a permit for a metal roof in Lansdale, and how does that work?
Yes, a full replacement or re-roof typically requires a permit from the Borough of Lansdale, and the requirements and inspection steps vary. We handle the permit application and coordinate the inspection as part of the job. If your home is in a historic district or an HOA, there may be design review for panel profile and color, and we help you prepare that submission.
My neighbor and I share a property line, and my new metal roof will be close to his fence. What do I need to know?
Property line rules in Lansdale and Montgomery County govern setbacks and drainage, so we keep the roof and gutter discharge on your side and avoid directing water onto a neighbor. If your HOA has architectural review, we coordinate the approval before ordering materials. We are happy to walk the property line with you so there are no surprises.
Are you insured for work on my Lansdale property?
Yes. Philadelphia Metal Roofing is fully insured with general liability and workers' compensation coverage.
What maintenance should I do on a metal roof in Lansdale before winter?
In Lansdale, the priority is keeping water moving. Clear leaves from gutters and downspouts, especially if you have mature trees nearby, check that snow guards are secure, and look for lifted fasteners or sealant gaps at flashing and chimneys. We offer inspections and can re-fasten or replace screws before the first heavy snow. Call (267) 715-9723 to schedule a pre-winter check.
Why choose us?

Trusted professionals in Philadelphia

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Philadelphia

All your work handled by qualified professionals in Philadelphia

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

288+ Verified Client Reviews in Philadelphia

⭐⭐⭐⭐⭐ 4.9/5 · 288 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Philadelphia · Response within 24h · No commitment · ☎ (267) 715-9723

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Philadelphia ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm