Serving the Philadelphia area  ·  (267) 715-9723  ·  Open Mon-Sun 7am-7pm
📞 (267) 715-9723 Free Quote

Metal Roofing in Phoenixville, PA (19460) · Local Professionals

Philadelphia Metal Roofing · Fast response in Phoenixville and the Philadelphia area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+288Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Phoenixville is a steel town at heart, and its roofs show it. From the historic rowhouses near Bridge Street to the newer infill going up along Nutt Road, this borough has a mix of pitches, ages, and materials that keeps any roofer on their toes. The old industrial buildings and the tightly packed homes on streets like Starr and Main have seen everything from nor'easters to summer hail, and their roofs tell the story.

We're Philadelphia Metal Roofing, and we've worked on everything from the slate-look metal roofs on Victorian twins near Reeves Park to the standing seam porch roofs on the brick rowhouses off Bridge Street. Homeowners in 19460 call us because we know how Phoenixville's freeze-thaw cycles and heavy snow loads stress flashing and seams, and we fix it right the first time. Whether you're near the Colonial Theatre or out toward the Schuylkill, we're your local metal roofing team.

Metal Roofing in Phoenixville (19460)

Phoenixville sits in the Schuylkill River valley, and that means steep grades, tight lots, and a mix of roof pitches that can challenge even experienced crews. The historic rowhouses near the steel plant often have mansard fronts and low-slope porch roofs where water pools and ice dams form. Newer construction on the hills above town deals with wind exposure and tree debris from the surrounding woods. We've seen it all: failed fasteners on corrugated barn roofs out toward Charlestown, separated seams on standing seam panels after a storm, and copper flashing on bay windows that's been patched one too many times. Our team knows how to navigate the narrow alleys and steep driveways that are common in Phoenixville's older neighborhoods, and we always check for proper attic ventilation and ice barrier before we recommend a full replacement.

We've been serving Phoenixville and the greater Philadelphia area for years, and we understand the local building stock, from the 1920s brick twins to the 1950s ranches. When you call us, you're talking to a contractor who knows the difference between a Phoenixville rowhouse and a Chester County farmhouse, and we'll give you straight answers about what your roof needs.

Our services in Phoenixville

How a Job Works in Phoenixville

Step 1: You call us at (267) 715-9723 or fill out our contact form, and we schedule a free on-site assessment. We'll walk your roof, check the flashing, seams, and fasteners, and look for signs of leaks or storm damage. We'll also discuss your options, whether it's a repair, a replacement, or a retrofit over existing shingles, and give you a written estimate.

Step 2: Once you approve the estimate, we pull the necessary permits with the Borough of Phoenixville (requirements vary, so we verify with the local building department). We schedule the work around your timeline and coordinate with any HOA if you're in a community with design guidelines. On the day of the job, our crew arrives on time, protects your landscaping, and gets to work. If access is tight, we'll use specialized equipment to get materials to the roof without damaging your property.

Step 3: After the work is done, we do a thorough cleanup, magnet-sweep for nails, and walk the property with you to make sure you're satisfied. We don't leave until you're happy, and we back our work with a warranty. We leave your property clean and your roof ready for whatever Phoenixville weather throws at it.

Pricing for metal roofing in Phoenixville depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. For a typical rowhouse in 19460, a metal roof replacement might start around $9 per square foot, while a standing seam installation runs from $10 per square foot. If you're dealing with a leak or storm damage, repairs start at $450, and flashing work around chimneys or skylights starts at $600. We also offer free estimates for storm and wind damage inspections, so you know exactly what you're dealing with before you commit. Call us at (267) 715-9723 to schedule your free estimate and get a realistic ballpark for your project.

My rowhouse near Reeves Park has a low-slope porch roof that leaks every winter. Can metal roofing fix that?
Yes. Low-slope roofs on Phoenixville rowhouses are prone to ice dams and standing water, especially on north-facing porches. We often recommend a standing seam metal roof with a proper ice barrier and increased ventilation to prevent future leaks. We'll assess your roof's pitch and insulation to determine the best solution.
A storm just blew some shingles off my roof in Phoenixville. Do you offer emergency repairs?
We do. Call us at (267) 715-9723 for a free storm damage inspection. We'll tarp any active leaks, document the damage for your insurance claim, and provide a written estimate for repairs or replacement. We work with all major insurance carriers and can help you navigate the claims process.
How much does a metal roof replacement cost for a typical Phoenixville twin home?
For a 1,500 to 2,000 square foot twin, expect a metal roof replacement to start around $9 per square foot, so roughly $13,500 to $18,000 depending on material and complexity. Factors like roof pitch, access, and whether we need to remove existing layers will affect the final price. We provide free estimates so you can budget accurately.
Do I need a permit to replace my roof in Phoenixville?
In most cases, yes. The Borough of Phoenixville requires permits for roof replacements, and requirements vary based on the scope of work. We handle the permitting process for you and ensure all work meets local codes and inspection requirements. We always verify current rules with the building department before starting.
My HOA requires approval for roof color. Can you help with that?
Absolutely. We can provide color samples and documentation for your HOA's architectural review. If your home is in a historic district, we'll also ensure the panel profile and color comply with any design guidelines. We're experienced with HOA coordination and can attend meetings if needed.
Are you fully insured for work at my Phoenixville home?
Yes, we carry general liability insurance and workers' compensation coverage. Your property and our crew are protected throughout the project.
What maintenance should I do to keep my metal roof in good shape in Phoenixville?
Annual inspections are key, especially after winter. Check for loose fasteners, debris in valleys, and any signs of rust or corrosion. We recommend cleaning gutters twice a year and trimming overhanging branches. If you notice any issues, call us for a free inspection. We also offer maintenance plans to keep your roof in top condition.
Why choose us?

Trusted professionals in Philadelphia

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Philadelphia

All your work handled by qualified professionals in Philadelphia

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

288+ Verified Client Reviews in Philadelphia

⭐⭐⭐⭐⭐ 4.9/5 · 288 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Philadelphia · Response within 24h · No commitment · ☎ (267) 715-9723

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Philadelphia ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm