Serving the Philadelphia area  ·  (267) 715-9723  ·  Open Mon-Sun 7am-7pm
📞 (267) 715-9723 Free Quote

Metal Roofing in Philadelphia, PA (19107) · Local Professionals

Philadelphia Metal Roofing · Fast response in Philadelphia and the Philadelphia area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+288Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Philadelphia's rowhouses have been through a lot: humid summers, nor'easters, freeze-thaw winters, and the occasional fallen limb from a London plane tree. If your metal roof is leaking, peeling, or just due for replacement, we know exactly what you're dealing with.

From the brick fronts of Fishtown and Queen Village to the stone twins of Germantown and Mount Airy, homeowners call Philadelphia Metal Roofing because we understand the city's older housing stock. We handle everything from standing seam porch roofs to copper bay window accents, and we're based right here in 19107.

Metal Roofing in Philadelphia (19107)

Philadelphia's building stock is old, and that shapes every metal roofing job we do. In South Philadelphia, Fishtown, and Kensington, you've got 1800s to 1920s brick rowhouses with flat and low-slope roofs, mansard fronts, bay windows, and porch roofs that need standing seam or copper work. Out in Germantown, Mount Airy, and Chestnut Hill, the Victorian twins and stone Colonials are built of Wissahickon schist with slate and shingle roofs, and they often need stone-coated steel in a slate profile or metal shingles that match the original look. Then there's the Northeast, Roxborough, and Delaware County with their 1920s to 1950s brick twins and Cape Cods, plus the Levittown ranches in Bucks County and the Main Line stone estates. The city sits on the Delaware River coastal plain, with the Schuylkill River and Wissahickon Creek valleys, rolling Piedmont hills to the north and west, and mature street trees dropping leaves into every valley and gutter. That means we're always dealing with clogged gutters, moss streaks on older roofs, and ice dams at the eaves after a wet heavy snow. Hot humid summers bring severe thunderstorms and occasional hail, and nor'easters and remnant tropical storms test every flashing and chimney. Our team has seen it all, and we know how to detail a roof so it handles Philadelphia weather.

We serve Philadelphia and the surrounding area, from Center City to the suburbs, and we're fully insured with general liability and workers' compensation.

Our services in Philadelphia

How a Job Works in Philadelphia

Step 1: You call us at (267) 715-9723 or fill out our contact form. We'll set up a free on-site assessment, and we'll come out to look at your roof, take measurements, and talk through options. We'll also check for any active leaks or storm damage while we're up there.

Step 2: Once you approve the estimate, we schedule the work. In Philadelphia, that often means pulling a roofing permit from the city, and if you're in a historic district or HOA, we'll help coordinate any design review. Tight rowhouse lots mean we plan for material delivery and staging carefully, and we protect your landscaping and neighbor's property. We handle everything from tear-off to installation, and we keep you posted on progress.

Step 3: When the job is done, we clean up thoroughly, haul away all debris, and do a final walkthrough with you. We make sure you're happy with the work and that your property is left clean. We don't leave until you're satisfied.

Pricing for metal roofing in Philadelphia depends on the size of your roof, access, condition, and urgency. For a typical rowhouse, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you're retrofitting over existing shingles, that starts at $7 per square foot. Repairs start at $450, and leak repair also starts at $450. Screw replacement and re-fastening starts at $750. For corrugated and ribbed panel roofing, expect around $5.50 per square foot, while metal shingles and stone-coated steel start at $9 per square foot. Copper and specialty metal roofing starts at $20 per square foot. We also offer metal roof coating and painting from $2.50 per square foot, flashing and chimney repair from $600, and snow guards from $1,200. Gutters for metal roofs start at $9 per linear foot. Every roof is different, so call us at (267) 715-9723 for a free estimate. We'll give you a clear, honest price with no surprises.

My rowhouse in Fishtown has a flat roof with a standing seam porch cover, and the seams are separating. Can you fix that without replacing the whole roof?
Yes, we can often repair separated seams on standing seam roofs without a full replacement. We'll inspect the seams, re-crimp or re-seal them as needed, and check the fasteners and flashing. If the panels are too far gone, we'll let you know honestly. We work on porches and dormers all over Fishtown and South Philadelphia.
A nor'easter just blew some panels off my roof in the Northeast. Do you handle emergency storm damage?
We do. Call us at (267) 715-9723 for storm and wind damage repair. We offer free inspections, and we can tarp or secure your roof quickly to prevent further damage. We'll then assess the damage and give you a repair or replacement estimate.
What's the typical cost to replace a metal roof on a brick twin in Roxborough?
For a typical brick twin in Roxborough, metal roof replacement starts around $9 per square foot, but the final price depends on roof size, pitch, access, and whether we need to remove existing layers. We'll give you an exact quote after a free on-site assessment. Call (267) 715-9723 to schedule.
Do I need a permit to replace my roof in Philadelphia, and how do I find out about historic district rules?
Yes, roofing permits are commonly required for a full replacement or re-roof in Philadelphia, and thresholds and fees vary. If your home is in a historic district, design review may restrict panel profile and color. Always check with the City of Philadelphia website for the latest rules and to confirm what your project needs. We can help guide you through the process.
My neighbor's tree dropped a limb on my roof, and now there's a dent and a leak. Who is responsible, and can you help with insurance?
In most cases, the tree owner isn't automatically responsible unless they were negligent (for example, a known dead tree). Your homeowner's insurance typically covers the damage. We can provide a detailed inspection report and documentation for your insurance claim, but we never promise coverage or suggest deductibles can be waived. Call us at (267) 715-9723 for a free inspection.
Are you fully insured for roofing work in Philadelphia?
Yes, we are fully insured with general liability and workers' compensation coverage. We're happy to provide proof of insurance before we start any work on your property.
How often should I have my metal roof inspected in Philadelphia, and what maintenance does it need?
We recommend an inspection every year or after any major storm. Philadelphia's humid summers and freeze-thaw winters can loosen fasteners, clog gutters with leaves from London planes and oaks, and cause ice dams. Regular maintenance like clearing gutters, checking flashing, and replacing worn screws will extend the life of your roof. We offer free estimates for inspections.
Why choose us?

Trusted professionals in Philadelphia

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Philadelphia

All your work handled by qualified professionals in Philadelphia

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

288+ Verified Client Reviews in Philadelphia

⭐⭐⭐⭐⭐ 4.9/5 · 288 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Philadelphia · Response within 24h · No commitment · ☎ (267) 715-9723

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Philadelphia ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm